Ventilation Megastore logoVentilation Megastore logo
Ventilation Megastore logo
Menu
Menu
Log In
Cart
BUILD YOUR SYSTEM
Log In
Basket

Condensation forms when warm, moist air cools quickly. The warmer the air in your home, the more water vapour it can hold. When the temperature then drops - usually at night - it cannot hold as much moisture, so droplets will form on cooler surfaces such as windows and walls.

Without good ventilation to keep the air circulating and remove humid air, all houses can be prone to condensation. However, these problems tend to be more present in older homes.

Why are old houses more likely to develop condensation?

A warmer house will typically have less condensation because the air doesn’t reach the dew point as frequently, causing less water vapour to turn into liquid.

Newer, more modern houses are required to be more airtight and energy efficient to comply with strict building regulations. This means that these properties are likely to have more insulation, and will be better at retaining heat.

Newer homes, if built to specification, generally feature double glazing, thick insulation in the loft, and dual-skinned walls with cavity insulation. This setup helps prevent heat loss through walls, ceilings, and the roof, keeping stable internal temperatures compared to older houses.

Older homes were built when building regulations weren’t as strict, and therefore tend to have considerably lower levels of insulation throughout. This is especially the case if your home was built before the 1920s, when solid walls were commonplace, meaning there’s no insulation or airflow within the wall to retain heat and prevent damp.

Unfortunately for owners, this means that ceilings, windows and walls will be cooler, and the overall air temperature will fall faster once the heating is switched off - meaning it’s more likely that condensation will be able to form.

old house

Could I be at risk of serious problems as a result?

Without good insulation and ventilation, condensation is more likely to become a major issue in older homes - especially around windows. While modern houses have UPVC window frames, older properties typically have windows made from wood which can be permeated by water. Even if your window looks ok on the outside, there could still be rot and mould lurking beneath the surface.

Older homes can also suffer from damp build-up in walls, as moisture can soak through the paint and reach the plaster, which then can result in damp patches arising. These patches are likely to cause the plaster to crumble and encourage mould to grow. If left unnoticed, it can turn into a very expensive repair job and a serious health risk.

How can I stop this from happening in my home?

In both new and old homes, the best way to reduce condensation is to improve ventilation - particularly in those rooms where it is more likely to occur, such as kitchens and bathrooms.

The first step is to ensure that you have modern, effective extractor fans to remove moisture at its source and prevent it from spreading throughout the property. The most efficient types tend to be those that are motion sensored, which will start and stop on their own, depending on humidity levels.

Extractor fans are absolutely essential, but it’s also a great idea to invest in a mechanical heat recovery ventilation system (MVHR) to further improve your ventilation, while helping to keep your home warm at the same time.

MVHR units will remove the humid, moist air from your home and replace it with fresh, filtered air from outside. It’ll also recover heat energy from the property and transfer it into the new incoming air via a heat exchanger, helping to reduce those heating bills at the same time.

Are you worried about the effect of condensation on your older property? We can help! Get in touch today for a free, no obligation consultation.

Copyright © 2022 – 2024 Ventilation Megastore, All rights reserved
linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram